HVAC31
Telnet The Telnet protocol is a remote access protocol that can be configured by logging in to a switch. Assuming the IP address of the switch is 192.168.0.1, there are only two steps to configure the switch through Telnet: Step 1, click Start, Run, enter "Telnet 192.168.0.1", Step 2, and then click OK or Enter key to establish a connection with the remote switch. Then, the switch can be configured and managed according to actual needs. 2. Through the web interface, you can set the switch as follows: Step 1, run the web browser, enter the switch IP in the address bar, press Enter, and the following dialog box will pop up. Step 2, enter the correct username and password. Step 3, establish the connection and enter the switch configuration system. Step 4, follow the prompts to set up the switch and modify parameters.
Classification:
other
Tag:
HVAC31
Message
Product Description
Fax：+86 22 23889986
Email：guohua.wang.oh@g-sanden.com
Address：NO.8,XEDA NO.2 Avenue,Xiqing Economic Development Area,Tianjin,P.R.China
Postcode：300385
Telnet The Telnet protocol is a remote access protocol that can be configured by logging in to a switch. Assuming the IP address of the switch is 192.168.0.1, there are only two steps to configure the switch through Telnet: Step 1, click Start, Run, enter "Telnet 192.168.0.1", Step 2, and then click OK or Enter key to establish a connection with the remote switch. Then, the switch can be configured and managed according to actual needs. 2. Through the web interface, you can set the switch as follows: Step 1, run the web browser, enter the switch IP in the address bar, press Enter, and the following dialog box will pop up. Step 2, enter the correct username and password. Step 3, establish the connection and enter the switch configuration system. Step 4, follow the prompts to set up the switch and modify parameters.
Previous Page
Next Page
Previous Page
Next Page
Related Products
Messages
Tianjin Sandian Automotive Air Conditioning Co., Ltd.
