HVAC31

Key words:

Products News Download
HVAC31

HVAC31

Telnet The Telnet protocol is a remote access protocol that can be configured by logging in to a switch. Assuming the IP address of the switch is 192.168.0.1, there are only two steps to configure the switch through Telnet: Step 1, click Start, Run, enter "Telnet 192.168.0.1", Step 2, and then click OK or Enter key to establish a connection with the remote switch. Then, the switch can be configured and managed according to actual needs. 2. Through the web interface, you can set the switch as follows: Step 1, run the web browser, enter the switch IP in the address bar, press Enter, and the following dialog box will pop up. Step 2, enter the correct username and password. Step 3, establish the connection and enter the switch configuration system. Step 4, follow the prompts to set up the switch and modify parameters.

Key words:

HVAC31

Don't know how to choose what's best for you?

Let us help you!

Our experts will contact you within 6 hours to meet your needs.

Submission